High Tensile Fence Supplies for Long-Run Perimeters

KUNYU can review a mixed order of fixed-knot woven wire rolls, high tensile barbed wire and steel T posts. List clips and other fixings separately and confirm their compatibility and availability. End, corner and gate assemblies, tensioning tools and electric-fence components are not automatically included. The minimum order is one 20ft container (1 × 20GP). Final SKU quantities, packing and shipment timing depend on the approved specification and complete order. Use the bulk supply scope table to prepare the enquiry.

High tensile refers to the wire tensile-strength specification. Ask for the required value, units, wire diameter and applicable test or material specification. It does not by itself establish the finished fence load rating, allowable post spacing or installation tension. Compare the complete wire, knot and support system for the intended use.

Final spacing depends on the specified fence, terrain, livestock pressure and end, corner and gate assemblies. For a standalone straight mile, 20 ft spacing gives 264 spans and 265 support positions including endpoints; 10 ft gives 528 spans and 529 positions. These are calculations for the stated spacing, not installation recommendations or the quantity of T posts alone. Use the installation order checklist before confirming a package.

No. Fixed knot describes the joint construction; high tensile describes the wire specification. KUNYU lists high tensile fixed-knot models, and high tensile wire can also be specified for other knot types. Confirm wire grade, dimensions, coating and installation requirements for the chosen model.

Published imperial fixed-knot models include 42, 48, 49, 61 and 96 in heights with 6 in stay spacing and 330 ft rolls. A design such as 1348-6-330 identifies 13 horizontal line wires, 48 in height, 6 in stay spacing and 330 ft roll length; it does not define every wire or coating value. Compare the fixed-knot range and the separate metric layouts before ordering.

Container quantity is confirmed for the selected model, wire, roll length and packing. General roll-count ranges are planning illustrations, not measured loading data for every model. Request net/gross weight, roll or pallet dimensions and a loading arrangement that meets the shipment weight and space limits. For mixed products, allocate both limits to the full load. Use the model-specific loading checklist with your quotation.

Select posts and bracing for the approved fence design, including the wire tension and site conditions. Steel T posts can serve as line posts where specified; end, corner and gate positions need their own support details. Total post length must allow for the above-ground fence and approved embedment. A 10 ft post or a high tensile label does not by itself establish suitable spacing.

KUNYU FENCING's minimum order is one 20ft container (1 × 20GP). The roll or post quantity depends on the selected specifications and packing. Different models or products can be submitted for mixed-container review; the allocation, compatibility and loading plan must be agreed in the quotation. Production lead time is quoted after specifications, packing and the production schedule are reviewed; ocean transit and final delivery are separate.

State the coating material and the applicable standard, class or minimum coating mass for the ordered wire diameter and exposure. Confirm galvanized or zinc-aluminium options for the selected model, and request relevant inspection evidence. A coating name alone does not establish service life. Specify the finish for steel T posts separately from the fence wire coating.