
26 in Hinge Joint Livestock Fence
26 inch galvanized high tensile hinge joint fence for field, farm and low livestock applications.
KUNYU FENCING manufactures livestock fencing supplies for importers, distributors, farm stores and ranch contractors. The range covers hinge joint, S knot and fixed knot woven wire fence in 26 to 61 inch heights, with 4 or 6 inch stay spacing and 330 ft rolls, plus the steel T posts that carry them. Because agricultural fencing supplies are specified by the animal rather than by the roll, the pages below are grouped by livestock class first — cattle, sheep, goats and hogs — then narrowed by height, wire count and gauge. Buyers sourcing rural fencing supplies for wide, low-density boundaries usually pair the woven wire range with barbed wire strands and longer posts. Every item is quoted factory-direct against your specification and destination port, with a 100-roll minimum, Class 3 galvanized or Zn-Al coating options, OEM labels and mixed-container loading for rural and remote delivery programmes.
8 products available for bulk order. Every item is quoted factory-direct against your specification, quantity and destination port.

26 inch galvanized high tensile hinge joint fence for field, farm and low livestock applications.

32 inch galvanized high tensile woven wire goat fence for sheep, goats, pasture and farm applications.

39 inch galvanized high tensile woven wire farm fence for livestock, cattle, pasture and ranch applications.

47 inch galvanized high tensile field fence for cattle, farm, pasture and general agricultural fencing.

42 inch high tensile fixed knot fence for hogs, cattle, pasture divisions and farm boundaries.

S Knot Livestock Fence
13-wire, 4 ft galvanized high tensile livestock fence with 4 in stay spacing, approximately 4 × 4 in openings and a 330 ft roll.

S Knot Livestock Fence
16-wire, 5 ft tall galvanized high tensile livestock fence with 4 in stay spacing, approximately 4 × 4 in openings and a 330 ft roll.

78 inch galvanized high tensile woven wire fence for deer, wildlife, tall fields and farm perimeters.
Send the fence type, height, wire count, stay spacing, gauge, roll length, coating, total quantity, packing preference and destination port. For project orders send the total fence run length instead and it will be converted into rolls, posts and wire.
Start from the animal you are containing, then confirm the design number, height, stay spacing and wire gauge.
| Livestock class | Recommended fence | Usual height | View range |
|---|---|---|---|
| Cattle and cow-calf pasture | Hinge joint or fixed knot, 6 in stay spacing | 39-49 in | 47 in Hinge Joint Fence |
| Sheep and lambs | Hinge joint or S knot, 4-6 in stay spacing | 32-48 in | 32 in Sheep & Goat Fence |
| Goats (horned and climbing) | S knot, 4 in stay spacing, smaller openings | 48-60 in | 60 in S Knot Fence |
| Hogs and pigs | Fixed knot, tight lower spacing | 42 in | 42 in Fixed Knot Hog Fence |
| Calves and mixed small stock | Hinge joint, low height | 26-32 in | 26 in Hinge Joint Fence |
| Deer and game exclusion | Hinge joint or fixed knot, tall panel | 78-96 in | 78 in Hinge Joint Deer Fence |
The same roll width can be right for one animal and wrong for another. These are the variables that move when the livestock class changes, and the ones to state when quoting rural fencing supplies across mixed stock.
Goats and lambs push through openings that hold cattle. Dropping stay spacing from 6 in to 4 in raises the wire count and the roll weight, so quote the spacing explicitly.
Hinge joint flexes under impact and suits general pasture. Fixed knot holds its shape under sustained cattle or hog pressure. S knot gives smaller openings without sharp knot ends.
26-32 in contains calves and small stock, 39-49 in covers cattle and sheep, 48-60 in is normal for goats, and 78-96 in is deer and game exclusion.
Heavier gauge line wires resist stretching where animals lean on the fence. Lighter gauge lowers roll weight and freight cost per roll on low-pressure runs.
Woven wire livestock fence normally runs 8-12 ft post spacing, tightening to 8 ft for cattle and bulls and opening to 15-20 ft on high tensile runs.
Class 3 galvanized is the standard specification for outdoor livestock fence. Zn-Al is specified where corrosion is heavier, such as coastal or high-rainfall pasture.
Order quantities, specification and shipping answers for buyers sourcing livestock fencing supplies in bulk.
Minimum order is 100 rolls for woven wire livestock fence, covering hinge joint, S knot and fixed knot designs. Steel T posts start at 1,000 to 3,000 pieces depending on the length and weight grade. Smaller trial quantities can often be arranged when they are combined with other products in the same container.
For a general farm and ranch range, 39 in and 47 in hinge joint field fence at 6 in stay spacing cover the largest share of cattle and sheep demand. Add a 32 in sheep and goat fence, a 42 in fixed knot hog fence and a 60 in S knot for goats to cover the rest of the livestock classes without holding many design numbers.
Hinge joint fence flexes at the joint, absorbing impact and returning to shape, which suits general pasture and rolling rural boundaries. Fixed knot fence locks the vertical stay to the line wire, so it holds its shape under sustained pressure from cattle, bulls and hogs and over long perimeter runs.
Roughly 1,300 to 1,700 rolls of light duty 0.8 m x 50 m hinge joint fence, 650 to 850 rolls at 1.2 m x 100 m, 500 to 650 rolls at 1.5 m x 100 m, and 380 to 500 rolls of high tensile fixed knot at 1.5 m x 100 m. A 20 ft container carries approximately 25 to 27 tons of fence cargo.
Yes. Mixed container loading is standard. A typical 20 ft mixed load might combine 300 rolls of 1.2 m x 100 m hinge joint fence at around 11 tons, 2,500 pieces of 6 ft T posts at around 9 tons, 120 coils of 400 m barbed wire at around 4 tons and clips or accessories to fill the remaining weight allowance.
At 10 ft post spacing a mile of fence takes about 528 posts, at 8 ft spacing about 660 posts, and at 12 ft spacing about 440 posts. Send the total fence run length and the intended spacing and the post quantity can be converted for you along with the roll count.
Production lead time is 15 to 25 days once the specification, quantity and packing are confirmed, depending on order size and whether custom coating or private label packing is required. Sample lead time is shorter and can be confirmed on request.
Yes. OEM labels, printed sleeves, product cards, roll wrapping, bundle packing and pallet packing can be arranged for qualified bulk orders. Loose rolls and bundles give the highest quantity per container, while pallet packing costs about 5 to 10 percent of capacity but suits forklift unloading at rural depots.
Use these technical guides to narrow the specification before requesting a factory quotation.
The same factory supplies the rest of the range. Most buyers combine two or three categories in one container to fill the weight allowance.
For cattle perimeter orders, compare 12.5 gauge 4-point barbed wire with the easier-handling 12.5 gauge 2-point barbed wire.