Model # KY-TPG-72 | Length 6 ft / 72 in. / 183 cm | Material Q235 steel | Weight grade 0.95 / 1.25 / 1.33 lb/ft
KUNYU FENCING · Factory Direct
6 ft Green Steel T Post Studded Q235 Fence Post with Anchor Plate
Factory quotation by specificationSend the required weight grade, finish, quantity and destination port for an accurate quotation.
MOQ: one 20ft container (1 × 20GP). Packing, production time and loading quantity are confirmed after specification review.
Length: 6 ft (6 foot / 72 in.) — this listing · other lengths made to order
Sea Freight
Export quotation support
Trade term, loading quantity and destination routing are confirmed in quotation.
Samples & Packing
Confirmed by specification
Ask about current sample and export-packing arrangements.
Ask for current inspection, packing and loading documentation before order confirmation · view company profile · request catalog
- 6 ft steel T post (6 foot / 72 in.) — T-shaped Q235 6 ft steel fence post with anchor plate that locks into the soil for long-term holding power
- 6' green studded fence T-post: studded / punched fastening points at approx. 10 cm (4 in.) spacing — fix wire with standard T-post clips
- Green coated finish (RAL 6005) blends into grassland, garden, pasture and vineyard settings
- Drives in with a post driver or hammer — fast installation on large 6 ft fence T post runs
- Bulk export supply for importers, distributors, farm-supply buyers and fencing contractors
Finish specification: RAL 6005 identifies the green colour; it does not by itself define the coating process, number of coats, dry-film thickness or corrosion performance. This page does not claim a standard double-coated finish. State any galvanizing, powder-coating or test requirement in the RFQ and confirm it in the quotation.
Product overview
Product Details
About This Product
This is a dedicated 6 ft green steel T post (6 foot / 72 in.), also known as a 6 foot T post — the most popular height for farm, ranch, garden, vineyard, orchard and yard-boundary fencing. The T-shaped Q235 low carbon steel profile cuts cleanly into most soil types, and the anchor plate near the base locks the post against movement once driven, so this 6 ft steel fence post keeps the line steady under fence tension and wind load — whether it carries field fence, welded wire, garden mesh or barbed wire.
As a 6' green studded fence T-post, the studded / punched fastening points run up the post face at roughly 10 cm (4 in.) intervals, so wire and mesh attaches with standard T-post clips. The listed finish is green RAL 6005. Confirm the required weight grade, finish and packing when requesting a quotation.
We supply 6 ft T posts wholesale to importers, distributors, farm co-ops and fencing contractors. The minimum order is one 20ft container (1 × 20GP). Packing, production time and container loading are calculated after the weight grade, finish and order quantity are confirmed.
For an accurate landed-cost quotation, send the destination port together with the required post length, weight grade, finish and quantity.
Need a different height? This 6 ft steel T post is also produced in 5 ft, 7 ft and 8 ft, and you can see our full range of steel fence T-posts (5–10 ft).
Highlights
- 6 ft steel T post — 6 foot (72 in.) length · 5 / 7 / 8 ft made to order
- Studded steel T-profile for standard fence-wire attachment
- Q235 low carbon steel with anchor plate base
- Studded / punched fastening points, approx. 10 cm (4 in.) spacing
- Green coated finish, RAL 6005 · HDG + powder coated optional
- Listed weight grades: 0.95 / 1.25 / 1.33 lb/ft; selected grade confirmed in the order specification
- MOQ: 1 × 20GP; bundle quantity confirmed in quotation
- Sample availability confirmed by specification
- Inspection requirements can be included in the RFQ
Technical reference
Specifications
Dimensions
| Post length | 6 ft (72 in. / 183 cm) · custom 5 / 6 / 7 / 8 ft |
| Profile | Studded steel T-profile |
| Stud spacing | Approx. 10 cm (4 in.) |
| Theoretical bare-post weight | 5.70 / 7.50 / 7.98 lb by listed weight grade |
| Weight grade | 0.95 / 1.25 / 1.33 lb/ft; confirm the selected grade in the RFQ |
Details
| Material | Q235 low carbon steel |
| Coating | Green coated, RAL 6005 · optional hot-dip galvanized + powder coated |
| Base | Anchor plate |
| Fastening | Studded / punched points, fits standard T-post clips |
| Bundle quantity | Confirmed in quotation |
| Minimum order | 1 × 20GP (one 20ft container); mixed-SKU allocation subject to quotation |
| Container loading | Calculated by weight grade and packing |
| Production time | Confirmed with the quotation |
| Payment | Confirmed before order |
| Trade terms | Quoted according to destination |
| Samples | Availability confirmed by specification |
Procurement planning
Download the 6 ft / bulk T post order checklist (CSV) to record the selected weight grade, finish, actual sample and bundle weights, quantity and destination. Use it with the quotation; the calculations below are planning scenarios.
6 ft Weight & Container Planning Reference
MOQ: one 20ft container (1 × 20GP). The KUNYU FENCING planning table below uses complete painted-post weights with anchor plates and a 200-piece bundle scenario. These are calculation inputs; actual finished weight, bundle format and export packing are confirmed for the selected order.
| 6 ft specification | Complete-post planning weight | 24,000 kg product budget | 27,000 kg product budget |
|---|---|---|---|
| 6 ft × 0.95 lb/ft | 6.20 lb / 2.812 kg | 8,400 pcs | 9,600 pcs |
| 6 ft × 1.25 lb/ft | 7.95 lb / 3.606 kg | 6,600 pcs | 7,400 pcs |
| 6 ft × 1.33 lb/ft | 8.65 lb / 3.924 kg | 6,000 pcs | 6,800 pcs |
Calculation: kg per post = planning lb × 0.45359237. Pieces = floor(product-weight budget ÷ kg per post ÷ 200) × 200. The 24t / 27t budgets exclude additional packing and accessories. For example, 7,400 of the 1.25 lb/ft reference posts weigh approximately 26,685 kg; adding an assumed 500 kg packing allowance gives 27,185 kg. The 200-piece bundle and 500 kg allowance are calculation inputs, not confirmed KUNYU packing terms. Check actual post weight, bundle dimensions, payload, route allowance and load distribution before confirming dispatch.
Planning method: compare complete-post weight, whole-bundle quantity and available cargo allowance, then check physical fit and unloading. See the KUNYU container loading guide for the calculation assumptions and carrier equipment references. A weight ceiling is not a dispatch guarantee.
Best Applications for 6 ft Green Steel T Posts
The 6 ft green studded steel T post is used across farm, ranch, garden, vineyard, orchard and yard-boundary fencing projects, carrying field fence, welded wire, garden mesh and barbed wire systems. After driving depth is chosen for the soil and fence load, confirm the required above-ground height with the project engineer or installer.
- Farm & Ranch Fence
- Pasture Fence
- Garden Fence
- Vineyard & Orchard
- Property Boundary
- Livestock & Cattle Fence
- Field Fence Support
- Welded Wire Support
- Barbed Wire Support
- Temporary Fence
The manufacturer behind your order
Steel T posts.Direct from the factory.
KUNYU FENCING supplies steel T posts for importers, distributors and fencing projects, with specification, packing and loading planned around the order.
Ask for the current documents relevant to your market and order, including available inspection, packing and loading records.
- Production lines
- 8
- Employees
- 78
- Plant area
- 13,640 m²
- KUNYU GROUP experience
- 30+ years
KUNYU FENCING is the export brand of Zhejiang Kunyu Wiremesh Co., Ltd. Figures describe company-level resources; experience refers to KUNYU GROUP. Product-specific capacity, packing quantities, lead time and applicable QC documents are confirmed with the quotation.
Manufacturer verification: Who is a T post manufacturer in China? See KUNYU’s manufacturer evidence, 5–10 ft product matrix and wholesale sourcing details →
Buyer questions
Questions & Answers
Clear answers for specification, packing and quotation review.
Ask a product question →Is this a true 6 ft T post?
Yes. This listing is a 6 ft steel T post — 6 foot / 72 in. overall length, the standard height for farm, ranch and boundary fencing. At the 1.25 lb/ft grade, the theoretical bare-post weight is 7.5 lb (approx. 3.40 kg); other grades calculate differently. We also make it in 5 ft, 7 ft and 8 ft to order.
Do you sell 6 ft T posts wholesale and in bulk?
Yes. KUNYU FENCING supplies bulk 6 ft T posts to importers, distributors, farm-supply buyers and fencing contractors. Send the weight grade, finish, quantity and destination for a minimum order of one 20ft container (1 × 20GP), with packing and loading quoted for the selected specification.
What is the bulk price for 6 ft T posts?
Pricing depends on the weight grade, finish, quantity, packing and destination. Send those details for a current factory quotation rather than relying on a fixed public price.
Which trade term should I request?
Send the destination port and preferred trade term. The available loading plan, shipment route and trade term are confirmed with the quotation.
What is the surface finish on the 6' green studded fence T-post?
The listed model has a green RAL 6005 finish. RAL 6005 identifies colour only; it does not establish the coating process, number of coats, dry-film thickness or corrosion performance. Hot-dip galvanized plus powder-coated construction can be quoted on request, and the final coating system must be written into the quotation and order confirmation.
What fencing applications is this green studded T post used for?
Farm fencing, ranch and pasture lines, garden fencing, vineyard trellis support, orchard protection, yard boundaries and temporary boundary fencing — with field fence, welded wire, garden mesh or barbed wire systems.
Does this 6 ft steel T post come with an anchor plate?
Yes. Every 6 ft steel fence post has an anchor plate near the base that increases stability once driven into the soil and reduces movement when the fence line is under wire tension or wind load.
How is this T fence post installed?
Drive it straight into the soil with a post driver or hammer. The studded / punched fastening points on the post face work with standard T-post clips to attach fence mesh or wire quickly.
Can length, color and packing be customized?
Yes. Standard lengths are 5 ft, 6 ft, 7 ft and 8 ft, with custom lengths available per project. Color, surface treatment, bundle quantity, labeling and export packing can all be adjusted to your order.
What information should I include in an inquiry?
Length, weight or spec class, surface finish, color, quantity, packing requirements and destination port — plus whether you need matching T-post clips, post drivers or fence mesh — so we can work out pricing and a container loading plan quickly.
Complete the system
You Might Also Need
Buyer resources
Related Articles
T Post Spacing for Woven and Welded Wire Fence
Woven wire fence: 8-12 ft. Welded wire: 6-8 ft. Fixed knot: up to 15-20 ft. Post length by fence height plus a T post quantity…
How to Install Field Fence with T Posts
Install hinge joint or fixed knot woven wire fence in 8 steps, from corner bracing to stretching and clipping, with a full tools and…
Fence Rolls and T Posts per 20ft / 40ft Container
How many hinge joint, welded wire and field fence rolls or steel T posts fit a 20ft, 40ft or 40HQ container, plus mixed loading tips…
Planning a Plastic Safety Fence Order?
Compare orange safety fence and plastic snow fence and submit the selected mesh with your post requirements. Post spacing, fixings and mixed-load protection need a specification review.