Model # KY-GTP-STUD | Length 8 ft / 96 in. / 2.4 m | Color Green RAL 6005 | Calculated weight 7.60 / 10.00 / 10.64 lb
KUNYU FENCING · Factory Direct
8 ft Green Steel T Post Studded Q235 Fence Post with Anchor Plate
Factory quotation by specificationSend the weight grade, finish, quantity and destination port for an accurate quotation.
MOQ: one 20ft container (1 × 20GP). Packing, production time and loading quantity are confirmed after specification review.
Length: 8 ft (96 in. / 2.4 m) — this listing · 5 / 6 / 7 ft made to order
Export Quotation
Buyer-specific calculation
Trade term, loading quantity and destination routing are confirmed in quotation.
Samples & Packing
Confirmed by specification
Ask about current sample and export-packing arrangements.
Confirm finish, packing, labeling and inspection requirements in the RFQ · view factory · request catalog
- 8 ft T post (96 in. / 2.4 m) — roughly 6 ft of fence above ground after 18–24 in. burial
- Q235 steel, T-shaped profile, weight grade 0.95 / 1.25 / 1.33 lb/ft — calculated 7.6 / 10 / 10.64 lb per post
- Green RAL 6005 painted surface; hot-dip galvanized and galvanized + painted available on request
- Studded face holds deer fence, field fence and barbed wire; anchor plate improves ground holding
- Bulk export supply for importers, distributors, farm-supply buyers and fencing contractors
Product overview
Product Details
About This Product
The 8 ft green steel T post (96 in. / 2.4 m) is the tall end of our studded post range. Set 18 to 24 inches into the ground it leaves roughly 6 ft of post standing, which is what a 60 to 72 inch fence needs — deer fence, vineyard and orchard fence, game and wildlife exclusion, solar farm perimeters and tall property boundaries. Below that height the 6 ft green steel T post is the cheaper and more common choice; above it, the 10 ft high tensile post takes over for full 8 ft exclusion fence.
The post is formed from Q235 steel with a studded face and finished in Green RAL 6005 paint. The studded face is what makes a tall post work: on a 72 inch fence there is a great deal of wire to hold in position, and the studs stop it creeping down the post under tension or animal pressure. An anchor plate is fitted for ground holding, which matters more at this length because a longer post carries more leverage from wind and wire load. Hot-dip galvanized and galvanized-plus-painted finishes are available where service life matters more than cost.
Weight grade is the decision that changes the post. At 8 ft the listed grades work out to approximately 7.6 lb, 10 lb and 10.64 lb per post. We supply 8 ft T posts to farm-supply importers, fencing distributors, ranch-equipment wholesalers, vineyard and orchard contractors. Packing and mixed-container requirements are confirmed in the quotation. See the full steel T post fence post range for other lengths, plus matching fixed knot fence and welded wire rolls.
Highlights
- Product: 8 ft green steel studded T post
- Length: 8 ft / 96 in. / 2.4 m; 5, 6 and 7 ft made to order
- Material: Q235 steel
- Weight grade: 0.95 / 1.25 / 1.33 lb/ft (approx. 1.414 / 1.860 / 1.979 kg/m)
- Color: Green RAL 6005 painted finish
- Face: studded face for fixing wire fence
- Anchor plate available for stable ground holding
- Accessories: T post clips available
- Packing: confirmed by weight grade, quantity and buyer requirement
- Labeling requirements: confirmed in quotation · Country of origin: China
- MOQ: 1 × 20GP; production time and sample availability confirmed in quotation
Technical reference
Specifications
Product & Dimensions
| Product type | 8 ft green steel studded T post |
| Shape | T-shaped steel fence post |
| Material | Q235 steel |
| Design | Studded face |
| Anchor plate | Available |
| Length | 8 ft (96 in. / 2.4 m) — this listing; 5 / 6 / 7 ft made to order |
| Est. weight per post | 7.6 / 10 / 10.64 lb by weight grade |
| Weight grade | 0.95 / 1.25 / 1.33 lb/ft (approx. 1.414 / 1.860 / 1.979 kg/m); customizable |
Finish & Ordering
| Surface treatment | Green painted / powder coated / hot-dip galvanized / galvanized + painted |
| Color | Green RAL 6005; other colors customizable |
| Accessories | T post clips available |
| Packing | Confirmed by weight grade, quantity and buyer requirement |
| MOQ | 1 × 20GP (one 20ft container); mixed-SKU allocation subject to quotation |
| Labeling | Confirmed with the quotation |
| Production time | Confirmed with the quotation |
| Payment & samples | Confirmed before order |
Model comparison
8 ft T Post Weight Reference
| Specification | Length | Weight grade | Est. weight / post | Typical application |
|---|---|---|---|---|
| 8 ft × 0.95 lb/ft | 8 ft / 2.4 m | 0.95 lb/ft | 7.6 lb | Light tall boundary, trellis and horticultural support |
| 8 ft × 1.25 lb/ft (popular) | 8 ft / 2.4 m | 1.25 lb/ft | 10 lb | Deer fence support, vineyard fence, orchard fence, high boundary fence |
| 8 ft × 1.33 lb/ft | 8 ft / 2.4 m | 1.33 lb/ft | 10.64 lb | Game and wildlife exclusion, solar farm perimeter, exposed sites |
| 7 ft × 1.25 lb/ft | 7 ft / 2.1 m | 1.25 lb/ft | 8.75 lb | Cattle fence, field fence, ranch boundary — made to order |
| 6 ft × 1.25 lb/ft | 6 ft / 1.8 m | 1.25 lb/ft | 7.5 lb | Farm and livestock fence — see the 6 ft listing |
| 5 ft × 1.25 lb/ft | 5 ft / 1.5 m | 1.25 lb/ft | 6.25 lb | Garden fence, light farm fence — made to order |
Weight per post is the weight grade multiplied by the length, so an 8 ft post at 1.25 lb/ft is approximately 10 lb. The listed model has a Green RAL 6005 finish and studded face. Container loading is confirmed per order because it depends on weight grade, packing and pallet plan.
Procurement planning
8 ft Weight & Container Planning Reference
MOQ: one 20ft container (1 × 20GP). The KUNYU FENCING planning table below uses complete painted-post weights with anchor plates and a 200-piece bundle scenario. These are calculation inputs; actual finished weight, bundle format and export packing are confirmed for the selected order.
| 8 ft specification | Complete-post planning weight | 24,000 kg product budget | 27,000 kg product budget |
|---|---|---|---|
| 8 ft × 0.95 lb/ft | 8.10 lb / 3.674 kg | 6,400 pcs | 7,200 pcs |
| 8 ft × 1.25 lb/ft | 10.45 lb / 4.740 kg | 5,000 pcs | 5,600 pcs |
| 8 ft × 1.33 lb/ft | 11.31 lb / 5.130 kg | 4,600 pcs | 5,200 pcs |
Calculation: kg = lb × 0.45359237; pieces = floor(product budget ÷ kg per post ÷ 200) × 200. Deduct packing and accessories separately from the approved cargo allowance. The 24t / 27t scenarios are product-weight budgets, not route approvals. Confirm actual weight, bundle dimensions, container payload, load distribution and unloading. The planning weight does not establish the ordered steel grade or strength.
Planning method: compare complete-post weight, whole-bundle quantity and available cargo allowance, then check physical fit and unloading. See the KUNYU container loading guide for the calculation assumptions and carrier equipment references. A weight ceiling is not a dispatch guarantee.
Why Choose This 8 ft T Post
- At 8 ft the post leaves roughly 6 ft standing after burial — the height a 60 to 72 inch deer, vineyard or boundary fence actually needs.
- Studded face holds tall runs of wire in position; on a 72 inch fence there is far more wire to restrain than on a paddock fence.
- Anchor plate resists the extra leverage a long post takes from wind load and wire tension.
- Q235 steel in three listed weight grades — calculated at 7.6, 10 or 10.64 lb per post — so buyers can compare the options consistently.
- Hot-dip galvanized and galvanized-plus-painted finishes available where a tall fence is expensive to replace.
- T post clips are available for easier wire fixing and faster installation on tall runs.
- Bulk packing and mixed-container loading can be evaluated for importers, wholesalers and contractors.
- State labeling, packing and mixed-container requirements in the RFQ for confirmation.
Buying 8 ft T Posts in Bulk
We supply 8 ft T posts for bulk B2B purchasing. MOQ is one 20ft container (1 × 20GP). Bundle size, pallet plan, labeling and mixed-container options are confirmed after the weight grade, finish and quantity are reviewed.
What sets the bulk price
Four inputs shape the quotation: weight grade, finish, quantity, and the destination port and trade term. Send those details for a current factory quotation.
Ordering & quotation
For an accurate bulk quotation, send the weight grade, surface finish, quantity, clips requirement, packing method and destination port. If you are not sure which grade suits the site, tell us the fence height, the wire type and the soil, and we will recommend one.
Matching the post to the fence
An 8 ft post buried 18–24 inches carries a 60 to 72 inch fence. For a 47 inch field fence use the 6 ft post; for a full 96 inch deer exclusion fence step up to the 10 ft high tensile post. Our guide on choosing T post height works through the calculation.
Best Applications for 8 ft Green Steel T Posts
The 8 ft green steel T post is used where a taller support is required for deer and wildlife exclusion, vineyard and orchard rows, solar-farm perimeters and high property boundaries. Required driving depth depends on soil, wire tension, exposure and the project design.
- Deer Fence Support
- Vineyard & Orchard
- Game Fence
- Wildlife Exclusion
- Solar Farm Perimeter
- Tall Property Boundary
- Ranch Perimeter
- Field Fence Support
- Welded Wire Support
- Horticultural Trellis
The manufacturer behind your order
Steel T posts.Direct from the factory.
KUNYU FENCING supplies steel T posts for importers, distributors and fencing projects, with specification, packing and loading planned around the order.
Ask for the current documents relevant to your market and order, including available inspection, packing and loading records.
- Production lines
- 8
- Employees
- 78
- Plant area
- 13,640 m²
- KUNYU GROUP experience
- 30+ years
KUNYU FENCING is the export brand of Zhejiang Kunyu Wiremesh Co., Ltd. Figures describe company-level resources; experience refers to KUNYU GROUP. Product-specific capacity, packing quantities, lead time and applicable QC documents are confirmed with the quotation.
Manufacturer verification: Who is a T post manufacturer in China? See KUNYU’s manufacturer evidence, 5–10 ft product matrix and wholesale sourcing details →
Buyer questions
Questions & Answers
Clear answers for specification, packing and quotation review.
Ask a product question →Can I order 8 ft T posts in bulk?
Yes. KUNYU FENCING supplies 8 ft T posts for bulk B2B orders. Send the weight grade, finish, quantity, packing requirement and destination for a minimum order of one 20ft container (1 × 20GP), with loading confirmed for the selected specification.
How much does an 8 ft T post weigh?
Weight is the grade multiplied by the length, so an 8 ft post is approximately 7.6 lb at the 0.95 lb/ft grade, 10 lb at 1.25 lb/ft and 10.64 lb at 1.33 lb/ft. The 1.25 lb/ft grade is the common choice.
What fence height is an 8 ft T post for?
Set 18 to 24 inches into the ground, an 8 ft post leaves roughly 6 ft standing, which suits a 60 to 72 inch fence — deer fence, vineyard and orchard fence, game fence and tall boundaries. For a 47 inch field fence a 6 ft post is enough; for a full 96 inch exclusion fence use a 10 ft post.
What is the bulk price for 8 ft T posts?
Price depends on the weight grade, surface finish, quantity, packing, destination port and trade term. Send those details for a current quotation.
How many 8 ft T posts fit in a container?
For complete painted 8 ft posts with plates, KUNYU uses planning weights of 4.740 kg at 1.25 lb/ft and 5.130 kg at 1.33 lb/ft. With 200-piece bundles and a 24,000–27,000 kg product-weight budget, the calculated weight ceilings are 5,000–5,600 and 4,600–5,200 posts respectively. Other grades require their own measured input. These figures do not establish physical capacity; confirm packaging, bundle layout, container payload and route limits.
What finishes are available on the 8 ft post?
Green RAL 6005 paint is standard. Powder coating, hot-dip galvanizing and galvanized-plus-painted are available on request — worth specifying on a tall fence that is expensive to replace, or in coastal and high-rainfall regions.
What material is the post made from?
Q235 steel with a T-shaped profile and a studded face, fitted with an anchor plate for ground holding.
Can you supply clips with the 8 ft T posts?
Yes. T post clips are available and can be packed separately or supplied together with the posts according to order requirements.
Do you supply other lengths?
Yes. 5, 6 and 7 ft are made to order on the same profile, and the 6 ft green steel T post and 10 ft high tensile T post have their own listings. Custom lengths are cut to order.
What information should buyers provide for a quotation?
Weight grade, surface finish, quantity, clips requirement, packing method and destination port. If you are unsure of the grade, send the fence height, wire type and soil condition instead and we will recommend one.
Complete the system
You Might Also Need
Buyer resources
Related Articles
T Post Spacing for Field Fence: How Far Apart?
Field fence T post spacing is 8-12 ft, up to 15-20 ft with high tensile fixed knot, plus posts-per-roll and posts-per-mile tables for…
U Post vs T Post: Strength, Cost and Which to Use
U post vs T post compared on profile, strength, weight per foot and price - when studded T posts suit field fence and when light U…
How to Install Field Fence with T Posts
Install hinge joint or fixed knot woven wire fence in 8 steps, from corner bracing to stretching and clipping, with a full tools and…